Accurate and High-end Corrosion Testing of Faucet Plating

Corrosion resistance tests of taps can be performed using metal testing equipment. Also called Environmental Chambers, Salt Spray Chamber because it is used to test the corrosion resistance of the coating of metal faucets, drains and other bathroom / kitchen accessories.

Corrosion is a natural process and can be described as a complex series of reactions between a metal surface and water. Due to the presence of other aqueous materials, such as impurities, the corrosion process is accelerated. Almost all metals tend to corrode to some extent. Corrosion resistance properties depend on many factors, such as metal composition, exposure to environmental conditions, impurities in the water, such as calcium and magnesium in the water, and so on.

Why is it important to perform a corrosion test?

First, it will affect the reputation of your brand. Each of the above conditions can be easily identified where the cranes are used. Now you can produce any product without corrosion. However, you can take appropriate steps to protect it and estimate its resilience.

Second, the offer of perishable products can be detrimental to consumers. Water flowing through a rusty faucet can retain water components that can be harmful when consumed. If properly tested in advance, a recommendation may be issued with the product.

Third, the corrosive product deflects the products. This can affect other accessories such as the boiler heater, door handles, other metal accessories around. Showers and showers are often used in bathrooms. Spreads corrosion that carries products to the corners of the room; exposure of doors, hinges, metal closures exposed to by-products. Such products are not even fully tested for biochemical corrosion. To prevent this, the manufacturer must first check the corrosion resistance of the cranes.

Fourth, corrosion can damage the aesthetics of bathroom fittings and other accessories such as washbasins, etc. To avoid this situation, the manufacturer must test the cranes before delivery. This reduces the service life of the entire pipeline in the area. Corrosion actually corrodes the metal, which can eventually weaken the entire system, leading to damage. If you are unsure, at least the manufacturer can take appropriate plating and testing steps to reduce the risk.

The salt spray tester is an environmental test chamber that is used to evaluate the properties of plated salt filled all around. There is an atomizer in this machine that creates salt-filled mist in the room. The test material is placed in this room and a visual inspection is performed after the test. This is a long test. A NaCl solution tank is connected to the machine to perform the test continuously.