Melt Flow Index Tester - Best Device to Test Plastics

Plastic granules are tiny pieces of plastic that can be found in products like food, cosmetics, and toys. They are often added as a filler or to make products easier to handle or to make them last longer.

One of the most popular applications of plastic granules is to manufacture PET water bottles. PET water bottles are often seen as a healthier alternative to traditional water bottles due to their environmental benefits. PET water bottles are also popular for their durability. They are resistant to UV and weathering, which means they will last longer than traditional water bottles.

With the wide use of plastics in manufacturing PET bottles, it is important to test the quality of PET bottles at every stage of production.

Importance of Testing PET Bottles

Testing of PET bottles is also important to protect the environment. PET bottles are made of plastic and, when they are recycled, they are often turned into new bottles. PET bottles are strong and can be used for a variety of products. They are popular for drinks, food, and other items that need to be stored in a cold environment. Testing of PET bottles is critical to ensure the safety of our food, and to deliver the liquid products safely to the customers. The FDA has developed a testing program for PET bottles that includes a variety of tests to identify various properties of PET bottles such as torque strength tester, melt flow test, bottle burst tester, bottle thickness gauge, hot wire bottle cutter, section weight analysis tester, etc.

Melt Flow Index Tester to Test Plastics

Testing the melt flow index of plastics is an important process in order to ensure that the plastics will not fracture during the manufacturing process. The melt flow index is a measure of how easily a material flows at temperatures above its melting point.

Melt flow index tester can be used to measure the MFI of plastics. This tester has a temperature range of about 160 to 370 degrees Fahrenheit and can measure the MFI of materials in a few seconds.

The melt flow index can be used to determine the suitability of a plastic for certain applications. For example, a low MFI may be desirable for products that will be exposed to high temperatures.

Specifications of Melt Flow Index Test Machine

Melt flow indexer is a special instrument to measure the Melt Flow Rate of molten plastics through a given orifice. The instrument comprises a calibrated cone with a measured orifice at its base. The molten plastic is forced through the orifice and a reading of the melted plastic that comes out from the orifice after every 10 seconds is measured. The rate of flow is then plotted on a graph to give a reading of the plastics’ melt flow index after ten such readings.

If you too are looking to measure the melt flow rate and want to buy a melt flow index tester, contact Pacorr Testing Instruments.