Salt Spray Testing with Touch-Screen Model, Bringing Revolutionary Change

Salt Spray Test or Salt Mist Test, is a renowned practice performed for quality inspection of coating layers. The test helps analyze the resistance strength of the plating or coating against the corrosive environment. However, with high-end technologies coming up in the market and updates on the software, the salt spray chambers have been modulated. In this blog, we will know more about such an upgraded model, Salt Spray Tester, HMI Model with Touch Screen facility.

Why an upgraded technology in the salt spray test is required?

Corrosion testing is an old-age practice that is conducted to evaluate the time at which a coated layer or plating will get destroyed under the long and continuous effect of a corrosive environment. The environment contains salty air with a mix of moisture which means an excessive concentration of oxygen molecules. When a coated component gets exposed to such an environment, with time they tend to lose its retaining strength and develop cracks. These cracks then further allow the corrosion to enter the main surface of the metal and destroy it completely.

There is a range of Salt Spray Testing equipment that is available in the market, and all are almost of the same design, features and software. However, the difference lies on the structure of the machine conforms to International Testing Standards or not. Now why one must go for the upgraded models?
The Upgraded Salt Spray Tester – HMI Model, with Touch-Screen features, can not only perform the basic corrosion test module but also brings various and high-end options that can be implemented in basic to complex testing procedures. The tester is equipped with HMI based software and a well-fitted wide screen Touch-based operative panel. The panel allows the user to set separate test parameters, or it delivers smart program selection based on some more frequently used corrosion testing. The user is not sure of the parameters they can use already set programs and run the tests. The machine allows fully automated testing that helps in reducing the chances of errors and produces a maximum level of precision in test reports. The salt fog formation is precise and fine and the coating is uniformly exposed to the same. This ensures better test results. The touch screen model also allows the user to visualize ongoing data of the test and post-test process, the data sharing is also very much flexible. The machine in all ways is a very efficient paint, plating testing instrument.