Want to Test the Peel Strength of Adhesives?

If your product packaging uses an adhesive that isn't staying put, it can be a frustrating experience for both you and your customers. Here are a few tips to make sure your packaging adhesive stays in place:

1. Choose the right adhesive. There are many different types of adhesives on the market, so it's important to choose one that is specifically designed for your packaging material. If you're unsure, ask a packaging expert for advice.

2. Test the adhesive. Before you use it on your packaging, it's a good idea to test the adhesive on a small area to make sure it adheres properly.

3. Apply the adhesive correctly. Be sure to follow the directions on the adhesive packaging, and apply it evenly to avoid any areas that aren't properly adhered.

4. Allow the adhesive to dry. Most adhesives need time to set, so be sure to allow the recommended drying time before using or shipping your packaging.

When it comes to testing the adhesives, peel strength is an important factor to consider. This property measures the force required to peel two surfaces apart that have been bonded together with an adhesive. Generally speaking, the higher the peel strength, the better the adhesive performance. There are a few different ways to test peel strength, but the most common is the T-peel test.

To perform a T-peel test, the adhesive bond is first placed on a flat surface. A T-shaped cutter is then used to score the adhesive bond. The two halves are then peeled apart at a 90 degree angle, and the force required to do so is measured. The results of the T-peel test can be affected by a number of factors, such as the type of adhesive used, the surface roughness of the substrates, and the bonding method.

There are a variety of applications where peel strength is important. For example, in the packaging industry, strong adhesives are necessary. If you want to know the peel strength of a packaging material, you need a Peel AdhesionTester. This type of tester is used to measure the force required to peel a material away from a substrate. The Adhesion Strength Tester is used to test a variety of materials, including metals, plastics, composites, and laminates. The tester can be used to test the peel strength of adhesive bonds, as well as the peel strength of coatings. The peel strength tester is a valuable tool for quality control and research and development.

How to perform the test using Peel Strength Tester

A peel strength tester/Adhesion Strength Tester is a device used to measure the force required to peel two materials apart. This can be done in a variety of ways, but the most common is the 90 degree peel test. This test is performed by attaching one material to the holding fixture of the tester and the other material to the moving peel head. The head is then moved at a specified speed (usually 20 mm/min) and the force required to peel the materials apart is recorded.

There are a number of factors that can affect peel strength, such as adhesive type, substrate surface roughness, and cure time. It is important to consider these factors when choosing an adhesive and testing its performance.

If you are a manufacturer in the packaging industry and looking to know more about Peel Strength Tester, contact Pacorr Testing instruments.