Tensile Testing Machine Computerized

These materials have to bear various forces of different amplitude on a continuous basis. These forces are so fierce that they can easily deform or damage the products or the materials to such an extent that it could lead to its complete failure. The manufacturers of such products need to ensure that the quality of the products they are manufacturing are of best quality and are able to bear such high forces without causing failure. For this, the manufacturers must test the strength of the materials with proper testing procedure. 

Pacorr is one of the most reliable Tensile Testing Machine Computerized manufacturers and suppliers that have been involved in providing the best testing instruments for the industries and help them in maintaining the best quality of the products. In industries like polymers, plastics, rubber, metal etc. the products produced are meant to be used at such places where the working conditions are extreme which can cause very adverse impact on the quality as physical propertied of the products. There are various forces acting upon the materials that cause their deformation and eventually leading to damage and failure. If these materials fail during their industrial usage, it can cause serious accidents and safety threats. This is why the manufacturers of these products must ensure their best strength. There are different types of strengths that must be tested for best results. One such strength is the tensile strength. The tensile strength of a material can be defined as the amount of tensile force that a material can bear without facing any type of damage or failure. This strength can be very useful for the situation where there is an application of extreme tensile forces on the materials.

The Tensile Testing Machine Computerized offered by Pacorr is one of the best testing instruments that can be used for testing of the tensile strength of any materials. For this, there is a specimen prepared to be used during the test. The specimen should be prepared according to the dimensions prescribed in the quality testing standards. There is also available sample cutting die that can be used for cutting a specimen with accurate dimensions. The specimen is placed between the clamps and then the clamps are moved away from each other. The specimen extended and the tensile force is applied on the specimen unless it fails. Once the specimen fails, the force application is immediately stopped and the peak load is recorded and displayed on the digital display. The instrument also comes with a computer connectivity port along with computer software that helps in easily downloading the testing data and better analysis for ensuring better quality assurance.

Capacities provided: 50 Kgf/ 100 Kgf/ 250 Kgf/ 500 Kgf/ 1000 Kgf/ 2000 Kgf/ 3000 Kgf/ 4000 Kgf/ 5000 Kgf/

Test to be Performed: Compression Test / Top Load Test/ Push-Pull Test, Adhesion Test, Peel Bond Test, Seal Strength Test and Tensile Test

• No. of screws: Single screw mechanism driven through motor & gearbox 
• Vertical Clearance: 700 mm 
• Exterior Body Paint: Powder coated 
• Display: Digital LCD Display 
• Capacities: 50 Kgf/ 100 Kgf/ 250 Kgf/ 500 Kgf/ 1000 Kgf/ 2000 Kgf/ 3000 Kgf/ 4000 Kgf/ 5000 Kgf/
• Load cell: ‘S Type’ load-cell of reputed make 
• Least count for load: 5/10/20/50/100/200/300/400/500 Grams
• Results displayed on screen: Load &Elongation values 
• Least count for elongation: 0.1 mm 
• Speed Range: 40mm/min - 400 mm/min 
• Load units: Kgf
• Speed control: Dedicated AC Drive
• Motor for speed variations: Reputed make induction motor with dedicated gear box 
• Test jaws: Vice Type (By default) else Please specify your applications at the time of order. 
• Power Supply: 230 Volt AC, 50 Hz, Single Phase
• Paint: Powder Coating
• RS232 Port to interface with PC

• Floor standing model 
• Unique and compact design features 
• Fitted with Microprocessor based advance controller 
• Single Column 
• High accuracy in elongation 
• Reputed make Induction motor with Dedicated Gear Box and Drive for speed variation and to maintain speed at high
• Over Load Protection
• Over Travel Protection
• Emergency Manual switch for stopping the machine
• RS232 Communication port to interface the machine with computer 
• You can get graph for load v/s elongation (stress v/s strain) and also get a excel sheet
• Computer/Laptop: Client scope