Blogs

Enhance your understanding of testing and precise quality control indistinct applications with our
knowledge based articles coming from top editors of industry leaders.

Remove Damages of Metals by Performing Corrosion Test

Published: 03 Aug, 2021
Verified By: Kishore Gupta - Technical Expert
Corrosion changes the look of material by breaking it up due to chemical reactions with its environment and refers to the oxidation of metals.
Continue reading...

Testing The Metal Quality and its Impact Resistance

Published: 03 Aug, 2021
Verified By: Kishore Gupta - Technical Expert
One is 'IZOD Impact resistance test' and another is 'Charpy Impact resistance test'. Both are dependent on a similar standard yet are distinctive in the manner the tests are led.
Continue reading...

Detect Ash Content Analysis of Elastomers

Published: 03 Aug, 2021
Verified By: Kishore Gupta - Technical Expert
Ash content detection is perhaps the most significant test with regards to elastomers and standardized Muffle Furnace are required to perform the test.
Continue reading...
Environmental Stress Crack Resistance Tester or ESCR is a significant property that is needed in the polymer business for its long anticipation.
Continue reading...

Control Damages Caused Due to Friction on Packages During Storage

Published: 02 Aug, 2021
Verified By: Kishore Gupta - Technical Expert
Coefficient of friction testing is used to test with the frictional bonding in which two surfaces in contact can slide past one another.
Continue reading...

Ensure High Quality of Plastic Material by Measuring Its Gravity

Published: 02 Aug, 2021
Verified By: Kishore Gupta - Technical Expert
Digital Specific Gravity Balance is a highly integrated measuring device that is utilized to determine the Specific gravity of plastic compounds.
Continue reading...

Know the Importance of Tensile Test on Materials used in Industries

Published: 31 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
The Tensile test can be performed on a rubber band, pulling it apart until it gets snapped. A Tensile Testing Machine is used to apply more force and can collect more accurate data than their human operators alone could do.
Continue reading...

Measure Capability of Plastic Products Under Extremely Low Temperature

Published: 31 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Ultra-Low Deep Freezer gives accurate testing results used in various industries and laboratories to attain extremely low temperatures which are required for various applications.
Continue reading...

Ensure Higher MFI Value to Increase the Quality of Polymers

Published: 30 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Melt Flow Index Tester is used to measure the flow rate of various Polymers. The generated values help to distinguish the different grades of Polymers.
Continue reading...

Evaluate the Quality of Plastic Foil

Published: 29 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Vacuum leak testing is used to test accurately and decide the smallest of the defective opening in the pouches.
Continue reading...

Measure Compressive Force on Corrugated Boxes

Published: 28 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Continue reading...

Ensure Safety of Products Packed In Corrugated Papers

Published: 27 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Cobb Sizing Tester is used in the paper and packaging industry to test the quality of corrugated boards and boxes.
Continue reading...

Ensure Better Performance of Corrugated Boxes with Crush Testing

Published: 26 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
The ECT or Edge Crush Test is a fundamental test to perform while manufacturing a furrowed box.
Continue reading...

Perform Peel Strength Test to Check the Quality of Adhesives

Published: 24 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
The testing machine is used for the quality assurance of the product. The Peel Strength Tester imitates the real-life pulling mechanism.
Continue reading...

Analyze Bursting Quality of Corrugated Boxes

Published: 23 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Standard Bursting Strength Tester allows the user an issue-free involvement with the Single Push Button Operation.
Continue reading...

Perform Standardised Heat Seal Test on Plastic Films

Published: 22 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Laboratory Heat Sealer is utilized to seal thermoplastic materials, envelopes, bags, packets, and so forth by applying heat.
Continue reading...

Measure Distortion in Corrugated Boxes During Storage and Transit

Published: 21 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Box Compression test of the carton is a significant feature that should be examined. The box compression strength of a corrugated board box is a direct measure of its stacking strength.
Continue reading...

Evaluate Puncture Resistance of Foam Sheets

Published: 20 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
The Puncture test measures the resistance of paperboard or corrugated sheets to avoid transit damages like holes or cracks.
Continue reading...

Measure Colour Quality of Packaging Products

Published: 19 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Spectrophotometers are one of the widely used colour measuring instruments that can evaluate the colours of the products in various production verticals right from the tissues of the papers to the coated paper materials.
Continue reading...

Ensure Polymer Quality by Examining Its Physical Properties

Published: 17 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Laboratory Hot Air Oven is provided with high-quality imported Glass wool protection utilized for complete insulation.
Continue reading...

Conduct Secure Seal Test of Bottle Caps to Avoid Spillage of Liquid

Published: 16 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Secure Seal test is one of the important quality checks which is acted in the testing research centers of PET and Preform firms to ensure the entire properties of PET Bottle tops.
Continue reading...

Test Colour Quality of Paints and Coatings

Published: 15 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
The Spectrophotometer tests the molecular structure of paint material and decides the bond strength and type of application for that material.
Continue reading...

Determine Environmental Cracks on Polymers

Published: 14 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Environmental stress cracking occurs due to microscopic cracks that form on polyethylene tanks as aggressive chemicals are stored inside them.
Continue reading...

Dry Sterilisation of Rubber Products

Published: 13 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Rubber provides a wide variety of products due to which the rubber industry is one of the most prosperous businesses.
Continue reading...

Determine Seal Performance of Plastic Packaging

Published: 12 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Plastic packaging is used by many manufacturers as it protects food from spoiling. Food gets wasted if they are not packaged properly.
Continue reading...

Determine Ash Percentage of Materials

Published: 10 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Muffle Furnace is used for high-temperature applications such as for melting glass, creating enamel coatings and technical ceramics and brazing.
Continue reading...

Check Environmental Effect on Packaging Material

Published: 09 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Humidity is the most important factor that changes the properties of the material when exposed to extreme temperature.
Continue reading...

Secure PET Bottles Product from Contamination

Published: 08 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
A secure seal tester is used to test the seal of the bottle. The instrument uses threaded part of the bottles is cut along with the seal and this seal is placed in the test fixture of the instrument.
Continue reading...

Protect the Product from Packaging by Measuring Their Water Absorptiveness

Published: 07 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Cobb sizing tester is broadly utilized in bundling businesses to test the water absorbance of the items.
Continue reading...

Determine Colour Fastness of Textile Material

Published: 06 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
The colour matching cabinet is used in various industries to evaluate, justify, and visually assess the colours in a standardized environment.
Continue reading...
A Bottle Top Load Tester is used to evaluate the structural resistance of a packed product when a compressive force is applied to it.
Continue reading...

Evaluate Bottle Closure to Avoid Spillage of Contents Packaged Inside

Published: 03 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
Torque tester for bottle caps is an exceptionally effective test machine which is utilized to perform torque test for caps and closures.
Continue reading...

Ensure Best Quality of PET Bottles to Avoid Spillage of Beverages

Published: 02 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
This machine utilizes a warmed Kanthal wire for cutting the segments easily into three sections. A short time later these parts are gauged independently, and area weight is investigated.
Continue reading...

Measure Tearing Strength of Packaging Bags to Ensure Best Quality

Published: 01 Jul, 2021
Verified By: Kishore Gupta - Technical Expert
The manufacturers of the packaging must ensure that they pick the fabric with the best tearing strength for best quality assurance of the products using Tearing Strength Tester.
Continue reading...

Measure Defects of Tempered Glass Using Polariscope

Published: 30 Jun, 2021
Verified By: Kishore Gupta - Technical Expert
The Polariscope Strain Viewer for Glass and Plastics helps in detecting that the glass has been through tempering furnace and non-uniform heat treatment.
Continue reading...

Leakage Free PET Packaging with Precise Quality Testing

Published: 29 Jun, 2021
Verified By: Kishore Gupta - Technical Expert
The best testing machine which can be used to measure the quality of the packaging products is Vacuum leak testing equipment.
Continue reading...

Ensure Best Quality Materials Used for Making Automotive and Aviation Parts

Published: 28 Jun, 2021
Verified By: Kishore Gupta - Technical Expert
Tensile Strength measures the force or resistance to lengthwise stress which is used to pull something to the point where it breaks.
Continue reading...

Test the Accurate Strength of Plastic Films

Published: 26 Jun, 2021
Verified By: Kishore Gupta - Technical Expert
Consequently, it is fundamental to perform a standard test technique for detecting the impact strength of the plastic films utilizing Falling Dart Impact Tester.
Continue reading...

Check Viscosity of Plastic Material to Get Best Quality of Plastic Products

Published: 25 Jun, 2021
Verified By: Kishore Gupta - Technical Expert
Plastic is the most widely used material in different industries for various applications as well as for domestic applications.
Continue reading...

Check the Colour Consistency of Products

Published: 24 Jun, 2021
Verified By: Kishore Gupta - Technical Expert
A spectrophotometer is a versatile colour measurement instrument suitable for most complex colour analysis. It determines the spectral reflectance at each wavelength.
Continue reading...

Ensure Seal Integrity of Bottles

Published: 23 Jun, 2021
Verified By: Kishore Gupta - Technical Expert
The Secure Seal Test is used to check the quality of the seal of different types of bottles. At the time of test, the sample is put inside a vacuum water condition.
Continue reading...

Determine the Liquid Absorptiveness Of Corrugated Packages

Published: 22 Jun, 2021
Verified By: Kishore Gupta - Technical Expert
Packages are transported to long distances and in between the product must undergo changes in temperature and a shipping route can lead to damages.
Continue reading...

Our USP's

01

Demonstration of Machine

  • Try Before You Decide
  • Experience Before You Invest
  • See It in Action – Free Demo
02

Global Reach

  • Delivering Excellence Worldwide
  • Serving Across Borders
  • Your Global Supply Partner
03

On-Site Support

  • Support That Comes to You
  • On-Ground Assistance, Anywhere
  • We Reach Where You Are
04

Team Strength

  • Powered by Expert Minds
  • Driven by Skilled Professionals
  • Engineering Excellence Team
05

Manufacturing

  • Precision-Driven Manufacturing
  • Smart & Automated Production
  • Engineered In-House Excellence
Testimonials

What Our Customers Say

Thanks to Pacorr Testing instruments, we have all the required quality testing instruments that have helped us to ensure the best quality delivered to our clients.

D

Danish

Fair Exports Pvt. Ltd.

The extensive range of testing instruments they have to offer, satisfied all my quality testing needs. The most impressive things, I feel, is the comprehensive after-sales support that I received from them.

NJ

Nipun Jain

Fast Pack India

I recently ordered some plastic molding testing instruments from Pacorr and I must say I am amazed by the quality of their devices and the support we got from their team was remarkable. I totally recommend Pacorr instruments for unmatched quality assurance.

BS

Bhaskar Srivastava

Dipty Lal Judge Mal Pvt Ltd

Pacorr has offered us the best range of chemicals and coating testing instruments that have made it extremely easy to take care of our product quality. Thanks Pacorr Testing Instruments.

RD

Rajpal Dhiman

Tasmay Unicoats Private Limited

I purchased a torque tester for my company which is working just perfectly fine since last 6 months. Also, their comprehensive after sales service makes them stand out from others. I will recommend Pacorr for best quality products and excellent customer service.

AJ

Mr. Anuj Jakhodia (Director)

Safe Closures LLP

WhatsApp